#14151: "WAS NOT ALLOWED TO SWITCH THE LOCATIONS OF THE CLIMBERS"
Hvad handler denne rapport om?
Hvad skete der? Vær venlig og vælg nedenunder
Hvad skete der? Vær venlig og vælg nedenunder
Vær sød at undersøge, om der allerede er sendt en besked om emnet
Hvis ja, venligst STEM for denne rapport. Rapporter med flest stemmer er dem der får PRIORITET!
| # | Status | Votes | Game | Type | Title | Last update |
|---|
Detaljeret beskrivelse
-
• Venligst kopier/indsæt fejlmeddelelsen du ser på din skærm, hvis der er en.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• Venligst forklar hvad du ønsker at gøre, hvad du gjorde og hvad der skete
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 • Hvilken browser bruger du?
Google Chrome v79
-
• Venligst kopier/indsæt tekst vist på engelsk i stedet for dit sprog. Hvis du har et skærmbillede af denne fejl (god praksis), kan du bruge en billedhostingtjeneste efter eget valg (snipboard.io for eksempel) til at uploade det og kopiere/indsætte linket her. er der adgang til denne tekst i oversættelsessystem? Hvis ja, er det blevet oversat inden for 24 timer?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• Hvilken browser bruger du?
Google Chrome v79
-
• Forklar venligst dit forslag præcist og sammenfattende, så det er så let som muligt at forstå, hvad du mener.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• Hvilken browser bruger du?
Google Chrome v79
-
• Hvad blev der vist på skærmen, da du blev blokeret (Blank skærm? Noget af spilbrugerfladen? Fejlmeddelelse?)
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• Hvilken browser bruger du?
Google Chrome v79
-
• Hvilken del af reglerne blev ikke respekteret ved BGA-tilpasningen
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• Er regel-brudddet synligt i e
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 • Hvilken browser bruger du?
Google Chrome v79
-
• Hvad var den spilhandling du ønskede at udføre?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• Hvad forsøgte du at gøre for at udløse denne spilhandling?
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 -
• Hvad skete der, da du forsøgre at gøre dette (fejlmeddelelse, meddelelsesstatusbjælke, ...)?
• Hvilken browser bruger du?
Google Chrome v79
-
• I hvilket stadie af spillet opstod problemet (hvad var den daværende spilinstruktion)?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• Hvad skete der, da du forsøgte at udføre denne spilhandling (fejlmeddelelse, meddelelsesstatusbjælke, ...)?
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 • Hvilken browser bruger du?
Google Chrome v79
-
• Venligst beskriv display problemet. Hvis du har et skærmbillede af denne fejl (god praksis), kan du bruge en billedhostingtjeneste efter eget valg (snipboard.io for eksempel) til at uploade det og kopiere/indsætte linket her.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• Hvilken browser bruger du?
Google Chrome v79
-
• Venligst kopier/indsæt tekst vist på engelsk i stedet for dit sprog. Hvis du har et skærmbillede af denne fejl (god praksis), kan du bruge en billedhostingtjeneste efter eget valg (snipboard.io for eksempel) til at uploade det og kopiere/indsætte linket her. er der adgang til denne tekst i oversættelsessystem? Hvis ja, er det blevet oversat inden for 24 timer?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• Hvilken browser bruger du?
Google Chrome v79
-
• Forklar venligst dit forslag præcist og sammenfattende, så det er så let som muligt at forstå, hvad du mener.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• Hvilken browser bruger du?
Google Chrome v79
Rapporthistorik
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
Your bug has probably been fixed already, or was linked to a temporary failure of BGA service.
In any case, when filling a bug report, make sure to have an explicit title linked to the incident (ex: with error message), so other players can recognize it and vote for it.
Tilføj noget til denne rapport
- Et andet bord-ID / træk ID
- Løste F5 problemet?
- Skete problemet flere gange? Hver gang? Tilfældigt?
- Hvis du har et skærmbillede af denne fejl (god praksis), kan du bruge en billedhostingtjeneste efter eget valg (snipboard.io for eksempel) til at uploade det og kopiere/indsætte linket her.
